BWCMP - 5230 SERIES, SPILFYTER FOR HAZARDOUS (SUPDAT)

  • MSDS: BWCMP
  • Manufacturer: JV MANUFACTURING CO INC
  • Product Name: 5230 SERIES, SPILFYTER FOR HAZARDOUS (SUPDAT)
  • National Stock Number: 7930-00N055562
Product Identification

Product ID:5230 SERIES, SPILFYTER FOR HAZARDOUS (SUPDAT)
MSDS Date:07/01/1993
FSC:7930
NIIN:00N055562
MSDS Number: BWCMP

Responsible Party
JV MANUFACTURING CO INC
963 ASHWAUBENON ST
GREEN BAY, WI 54304
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 800-334-9092

Cage: IO899

Contractor
JV MANUFACTURING CO INC
GREEN BAY, WI 54304 US

Telephone: 800-334-9092

Cage: IO899

Ingredients

SULFUR

CAS: 7704-34-9

RTECS: WS4250000

Fraction By Weight: <95.0%

OSHA PEL N/K

ACGIH TLV: N/K


SILICA, AMORPHOUS, PRECIPITATED AND GEL

CAS: 112926-00-8

RTECS: VV8850000

Fraction By Weight: >5.0%

OSHA PEL 20 MPPCF; Z-3

ACGIH TLV: 10 MG/M3 TDUST

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:MAY CAUSE IRRITATION.
EXPERIENCED AS MILD DISCOMFORT AND SEEN AS SLIGHT REDNESS OF EYE.
SKIN:MAY CAUSE IRRITATION. INHALATION:MAY CAUSE IRRITATION TO THE
UPPER RESPIRATORY TRACT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES:IMMED FLUSH W/PLENTY OF WATER FOR @ LEAST 15 MINS. HOLD
EYELIDS APART WHILE FLUSHING TO RINSE ENTIRE SURF OF EYE & LIDS
W/WATER. SEEK MED ATTN. SKIN:REMOVE CONTAMD CLTHG. BRUSH OFF EXCESS
POWDER W/DRY TOWEL. WASH AFFECTED AREA W/PLENTY OF SOAP & WATER
FOR SEVERAL MINS. SEEK MED ATTN IF IRRIT DEVELOPS/PERSISTS.
INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP. IF BRTHG
IS DFCLT,(SUPDAT)

Fire Fighting

Flash Point Method:CC
Flash Point:370F,188C
Extinguishing Media:USE WATER SPRAY, ALCOHOL FOAM, DRY CHEMICAL OR
CARBON DIOXIDE.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA IN POSITIVE PRESS MODE
& FULL PROT CLTHG I/A/W 29 CFR 1910.120-HAZARDOUS WASTE OPERATIONS
AND EMERGENCY RESPONSE.
Unusual Fire/Explosion Hazard:WHEN HEATED TO DECOMPOSITION, TOXIC FUMES
OF SULFUR DIOXIDES (SO*2) ARE EMITTED. DUST MAY FORM FLAMMABLE OR
EXPLOSIVE MIXTURE IN AIR.

Accidental Release

Spill Release Procedures:AVOID BRTHG DUST. CONTAIN LEAKING/SPILLED
MATL. CLEAN-UP USING SHOVELS, SWEEPING/VACUUM SPILLED MATL & PLACE
INTO APPRVD DISP CNTNR FOR PROPER DISP. ALL SPILLS SHOULD BE HNDLD
ACCORDING TO PREDETERM P LAN I/A/W 29 CFR 1910.120-HAZ WASTE
(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL, DRY, & WELL VENT AREA
AWAY FROM THOSE CHEM LIST IN INGREDS. KEEP AWAY FROM FLAMM MATAL &
SOURCES OF HEAT/FLAME. PROT CNTNRS FROM DMG.
Other Precautions:KEEP CNTNR TIGHTLY CLSD.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPRVD AIR PURIFYING RESP W/APPROP
DUST & METAL FUME PROT. NIOSH/MSHA SCBA SHOULD BE USED FOR LG SCALE
APPLICATION.
Ventilation:LOCAL EXHAUST & MECHANICAL (GENERAL):AS APPROPRIATE.
Protective Gloves:CHEM RESIST GLOVES.
Eye Protection:ANSI 787.1-1989 APPRVD CHEM GOGGLES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:DO NOT BREATH DUST. DO NOT GET IN EYES, ON
SKIN/CLTHG. WORKERS SHOULD WASH EXPOS SKIN THORO AFTER HNDLG W/SOAP
& WATER.
Supplemental Safety and Health
MFG TRADE NAME/PART NO:MATERIALS-MERCURY CONTROL POWDER. VP:1 @ 183C,
10 @ 246C. FIRST AID PROC:GIVE OXYG. SEEK MED ATTN. INGEST:DO NOT
INDUCE VOMIT. CALL PHYS/POIS CTL CTR IMMED. NEVER GIVE ANYTHING BY
MOUTH TO UNCON PERSON. SPILL RELEASE:OPERATIONS & EMERGENCY
RESPONSE.

Chemical Properties

HCC:V7
Boiling Pt:B.P. Text:833F,445C
Melt/Freeze Pt:M.P/F.P Text:240F,116C
Vapor Pres:SUPDAT
Vapor Density:8.8
Spec Gravity:2.0 (H*20=1)
pH:5.9
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:YELLOW CRYSTALS, POWDER, ODORLESS

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, MOST COMMON METALS, HYDROGEN, CHLORINE,
FLUORINE, ORGANIC MATLS @ ELEVATED TEMPERATURES.
Stability Condition to Avoid:WHEN HEATED TO DECOMPOSITION TOXIC FUMES
OF SULFUR DIOXIDES ARE FORMED.
Hazardous Decomposition Products:THERMAL DECOMPOSITION, OXIDES OF
SULFUR I.E. SULFUR DIOXIDE (SO*2), SULFUR TRIOXIDE (SO*3).

Disposal

Waste Disposal Methods:DISPOSE OF ORIGINAL (VIRGIN) MATL I/A/W FED, ST,
& LOC REGS. ONCE PROD SORBS MERCURY VAP THIS PROD TAKES ON TOX
CHARACTERISTICS OF MERCURY VAP SORBED & SHOULD BE DISPOS OF I/A/W
ALL FED, ST, & LOCAL R EGS FOR MERCURY VAPOR.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.